Water Softener Repair in Lubbock, TX | Trusted Local Specialists
Water softener repair in Lubbock, TX finds and fixes the failed part when your softener stops softening, leaks, stops regenerating or shows an error code. Lubbock Elite Water Softener repairs control valves, motors, floats, injectors, heads and brine lines, and tells you honestly when replacement costs less. Request a free estimate or call for service.
What Water Softener Repairs Are Available in Lubbock, TX?
Seven repairs cover the common failures: control valve repair, motor replacement, float valve repair, injector cleaning, head replacement, brine line repair and leak repair.
Water Softener Control Valve Repair
The control valve directs water through the service, backwash, brine and rinse stages. When it sticks, leaks or fails to cycle, water stays hard or runs constantly to the drain. We rebuild the valve with new seals and spacers, or replace it when it is worn beyond repair.
Water Softener Motor Replacement
The motor turns the valve through its cycle. A failed motor leaves the unit stuck in one stage, and you may hear a hum or grinding. We replace the motor and reset the cycle.
Float Valve Repair
The float valve limits how much water enters the brine tank. A stuck float causes overfilling, weak brine or salt that will not dissolve. We clean or replace the float assembly and set the brine level.
Injector Cleaning
The injector draws brine into the resin tank. Sediment clogs it, and a blocked injector means no brine reaches the resin, so water stays hard. We remove, clean and test the injector, and replace it if it is damaged.
Head Replacement
The control head holds the timer, display and electronics. When it loses its settings, shows no display or stops responding, replacing the head restores the system without a new tank.
Brine Line Repair
The brine line carries brine from the tank to the valve. Cracks, kinks or loose fittings cause air leaks and failed regeneration. We replace damaged tubing and tighten or replace fittings.
Water Softener Leak Repair
Leaks occur at the control head, drain line, tank connections or bypass valve. We trace the source, replace the faulty seal, fitting or hose and test for leaks. A leaking or cracked tank usually means replacement.
Common Water Softener Problems We Fix
- Not regenerating: the unit never starts a cycle because of a power, timer, motor or valve fault.
- Salt bridge: a hard crust forms above the water in the brine tank, so salt cannot dissolve. We break it up and clean the tank.
- Mushing: salt dissolves and re-forms into sludge at the bottom, blocking brine flow. We empty and clean the tank.
- Error codes: meanings differ by brand. We read the code, find the cause and clear it.
The diagnostic call-out typically costs $95 to $150. Tell us the make and model when you call so we can confirm we can service it.
Not a good fit if… your softener is well past about 10 to 15 years old and fails repeatedly. A new unit costs less over time. Lubbock water, roughly 60 to 70 percent Ogallala groundwater according to City of Lubbock reports, works the resin hard every day.
Is it time to repair or replace?
Repair fits a young unit with one failed part. Replacement fits an old unit, a leaking tank or repeated failures. Our free inspection compares both prices.
Homeowners comparing options also read about water softener maintenance, signs you need a new water softener, how long a water softener lasts, free water testing and water softener installation.
Frequently Asked Questions
Why is my water still hard even though the softener has salt?
Salt alone does not soften water. A clogged injector, fouled resin, a failed valve or a missed regeneration cycle can all leave hard water.
How do I fix a water softener that is not regenerating?
Check power and the control head settings first. If the unit still does not cycle, the motor, valve or head needs repair, and a technician diagnoses which.
What causes a salt bridge?
Humidity and salt type cause a crust to form above the water in the brine tank. Breaking the crust and cleaning the tank restores brine.
Why is my water softener leaking?
Leaks come from loose fittings, worn seals, a cracked drain line or a failing tank. A technician finds the source and replaces the part.
How much does water softener repair cost?
A repair call-out and diagnosis typically costs $95 to $150. The cost depends on the part. We give a price before work begins.
Do you offer same-day repair in Lubbock?
Same-day service depends on technician availability. Call and we will do our best to schedule quickly.
Lubbock Elite Water Softener TX provides water softener repair for homes and businesses across Lubbock and Lubbock County.
Get Your Free Estimate
Request a free water softener repair estimate. We will contact you within 24 hours. Get a Free Estimate or return to Lubbock Elite Water Softener for every service we offer.
Ready for softer water in Lubbock?
Request a free estimate or call Lubbock Elite Water Softener to talk through your home and your water.